Electro Mechanical Sales
Payment My preference is for purchase is via the eBid auction site.
Just click on the eBid logo underneath the item that you require and you will be taken to my eBid shop, where you can buy with the protection of the eBid system.
I also accept the following means of payment :-
1. Personal Sterling cheque drawn on a UK clearing bank Cashiers Cheque (Sterling Only)
2. Paypal.
If you would like me to send you an invoice or electronic payment request via Paypal, please click the email link at the bottom of the page.
Please feel free to talk to me about your requirement. I am happy to offer any advice that I feel is within my sphere of competence to give. If ordered from abroad (non UK) payment MUST be by Paypal or Cashiers cheque in Sterling and drawn on a UK bank.
Optical Shaft Encoder
These are lightly used and tested ENCC1J-D28-L00128 2 channel, optical encoder manufactured by Bourns
This component is of the highest industrial quality, featuring ball bearings to facilitate fast rotation speeds. I have a reasonable number of these available, please contact me for your requirements (discounts available for quantity ordered).
The short form data is as follows :-
Output : 2-bit gray code, Channel A leads Channel B by 90 degrees (electrical) with clockwise rotation.
Resolution : 25 to 256 cycles per revolution
Insulation Resistance (500 VDC) : 1,000 megohms
Electrical Travel : Continuous
Supply Voltage : 5.0 VDC +/- 0.25 VDC
Supply Current : 26 mA maximum
Output Voltage Low Output : 0.8 V maximum
Output Voltage High Output : 4 V minimum
Shaft RPM : 3,000 rpm maximumA full data sheet can be downloaded here :- Data
Price - 11.50
UK Postage and Packing - 2.90
To buy, click the eBid logo below and you will be taken to my eBid shop. Please click here:-
Motor Powered Fader
This is a high quality PGFM3200 resistive fader, manufactured by Penny + Giles.
The fader is powered, so the fader arm can be moved remotely as well as manually by the user. I have a quantity of these unit that have been lightly used and been tested both mechanically and electrically and found to be in perfect condition. I also have a smaller quantity of new old stock faders.
Applications:-
Audio Mixing Desks
Video Mixing Desks
Automation / control applications
Short Form Specification Motor :-
Type: Coreless Voltage : 12V
Current : 0.54 A Typical Power Consumption : 1.2 Watts
Fader :- Mechanical Stroke : 100mm
Resistance value : 10KR +/- 20%
Resistance law : Linear
The terminals are terminated with a socket and colour coded in the following manner :-
Motor +V - Red
Motor -V - Black
Ground (Metal Body) - Black
Fader track - End 1 - Red
Fader track - End 2 - Blue
Fader track - Wiper -Yellow
Conductive knob - Grey
The full specification can be downloaded here :- DataLightly Used And Tested : Price - 12.50
UK Postage and Packing - 3.90
To buy, click the eBid logo below and you will be taken to my eBid shop. Please click here :-
New Old Stock : Price: 19.50
UK Postage and Packing - 3.90
To buy, click the eBid logo below and you will be taken to my eBid shop. Please click here :-
Also available :-
1. Solenoids
2. Fans (12V, 230V, 110V)
Please contact me for details and price.
